Displayed information codes on my dishwasher
If you see a code consisting of numbers and letters on your dishwasher's display, it means there is a problem with the dishwasher. Here's a reference list so that you can identify what the problem is and what steps are needed. If the information code on your dishwasher is not listed here, you can download a user manual specific to your model by going to the Manuals & Downloads page.
Information codes
|
LC, LE |
Leakage check - Close the water supply valve. Go to your home's circuit breaker panel and set the dishwasher's circuit breaker switch to off. Then, contact the installer to repair. |
|---|---|
|
4C, 4E |
Water supply check - Check if the water supply valve is closed. - Check if the water supply is suspended. - Check if the water inlet valve or line is frozen or clogged by foreign objects. |
|
5C, 5E |
Drain check - Close the water supply valve. Check if the drain hose is clogged or folded. - Close the water supply valve. Check if the drain hole inside the pump is clogged. |
|
HC, HE |
High temperature heating check - Functional check. With the dishwasher empty, add detergent, and the run a cycle. - If the issue continues, go to your home's circuit breaker panel, and set the dishwasher's circuit breaker switch to off. Then, please contact a Samsung service center. |
|
3C, 3E |
Pump operation check - Functional check. Turn off the dishwasher and restart. |
|
PC, PE |
Dividing valve check - Displayed when the dividing valve is defective. |
|
CA |
Communications between main and sub PBAs check - Displayed when the circuit is open or the communication wiring is broken. |
|
bC2, bE2 |
Button check - Displayed by pressing any button for more than 30 seconds. - Try to bounce the buttons with fingers. In case of a touch screen, wipe off any moisture or foreign objects with a dry towel |
Note:
- If any information code keeps appearing on the screen, please contact a local Samsung service center.
- If overflow occurs, turn off the main water supply before calling a service.
- If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
- Only models with a digital display can display an information code as an actual code. Models without a display will use blinking lights instead. If your dishwasher is not operating normally and the lights are flashing, see our guide to interpret the code.
- If you require further technical support, please contact us, our services are open 24 hours, 7 days.
Thank you for your feedback!
Please answer all questions.