How to replace the BESPOKE refrigerator door panels
Last Update date : 2022-05-13
Customize and combine refrigerators to suit your lifestyle. Samsung Bespoke allows you to pick product types, and door panels colors and finishes to suit your taste.
Note:
- Panels need to be purchased separately, Available places to purchase door panels may vary depending on the country.
- It is recommended to proceed through a professional repair engineer / installer when replacing or installing the door panels.
- Disassembling or assembling the door panel on your own may result in product damage or personal injury.
- Samsung shall have no liability for any damage or injury during door panel replacement when done on your own.
Necessary tools
![]()
Tools are requiredfor the installation:
- Suction cup (Suction lift force: 15kg↑, size: 100mm↑)
- Flat head driver
- Gloves.
Note:
- A suction cup is necessary to enable the door panel to detach.
- These tools are not provided with the product.
How to detach the door panels
1
Remove the retaining clips on the upper door panel.
![]()
2
Attach the suction cup on the top of the upper door panel.
![]()
3
Slowly pull the suction cup forward to pull out the upper door panel. Be sure to support the bottom of the panel with your hands so as not to drop it.
![]()
4
Gently place the upper panel on the ground.
5
Remove the retaining clips on the bottom of the lower door panel.
![]()
Note: The number/location of retaining clips may vary depending on the region or model you have.
6
Attach the suction cup on the bottom of the lower door panel.
![]()
7
Slowly pull the suction cup forward to pull out the lower door panel.
![]()
Be sure to support the top of the panel with your hands so as not to drop it.
8
Gently place the lower panel on the ground.
9
The door panels are now detached.
How to assemble the door panels
1
Place the top panel into the groove along the bottom of the top door.
![]()
2
Press the edges of the panel in to secure it.
![]()
3
Insert the three retaining clips on the top of the door panel.
![]()
4
Place the bottom panel into the groove along the top of the bottom door.
![]()
5
Press the edges of the panel in to secure it.
![]()
6
Insert the three retaining clips on the bottom of the door panel.
![]()
7
Ensure there is no gap between the panel and the door and the retaining clips are fully inserted to prevent the panel from falling off due to external forces.
Thank you for your feedback!
Please answer all questions.