How do I apply the front protection film on a Galaxy Z Flip5?
Last Update date : 2023-09-12
Protect your Galaxy Z Flip5's larger cover screen, Flex Window, with these easy steps to apply the Front Protection Film. Use the applicator and other in-box components for an easy at-home installation and say goodbye to pesky bubbles and trapped dust.
How to apply the front protection film on a Galaxy Z Flip5 ?
1
Begin by unfolding your Galaxy Flip5. On a flat surface, remove all the stickers.
2
Rotate the device until one of the corners lines up with the device. For the microfiber cleaner, thoroughly wipe the device.
3
Use a dust remover to dab away any remaining dust and attach it. It's okay if you make a mistake because you have two chances.
4
Peel off the labeled section to expose the adhesive and flip the film so it matches the applicator holes.Press down on the adhesive part with your finger.
5
Position the squeegee over the center, cut along the line, and lift the film so the blue tab comes off. Then press the fan-shaped area forward
6
Flip the device upside down and detach one hole at a time. Remove the applicator and place the squeegee in the middle where the film is already attached.
7
Close the phone and remove the labeled section. Rub the edges firmly to ensure no gaps remain. You're all done!
Tips :
- When aligning, keep the film off the surface and use the camera flash to help line it up.
- Hold the device firmly while pressing the squeegee forward and firmly to ensure adhesion. Slide the squeegee evenly towards the edge of the screen.
Note:For further assistance or questions, please Contact us.
Thank you for your feedback!
Please answer all questions.