Cleaning your Jet™ Stick Dustbin and Filters

Last Update date : Oct 21. 2024

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

During the process of using your Samsung Jet™ Stick vacuum to clean your home, the Jet™ Stick may begin to have build-up dust, dirt, and anything else it picks. This build-up can decrease the performance of your Jet™ Stick.

Follow the guide below for cleaning your Jet™ Stick dustbin and filters, including micro and fine dust.

Note: 

  • If you have foreign matter clogged in the wheels of your Jet™ Stick, you will need to contact our technical experts.
  • If you need to purchase a new Vacuum Filter for your Jet™ Stick, click here.
How to clean jet stick filters and dustbin How to clean jet stick filters and dustbin
Note:
  • If you notice the display of your Jet™ Stick lighting up and are unsure what the icons mean, please refer to our Checking your Jet™ Stick Display page for more information.
  • For instructions of how to clean the brush of your Jet™ Stick, please click here.
  • If you are after information on Replacing the Clean Station™ Dust Bag, please click here.
  • For information setting up and using the Jet™ Stick, click here.
  • For information on cleaning the BESPOKE Jet™ Stick, click here.
1 While the Jet™ Stick vacuum is turned off, press the dustbin release button (1), and then pull the dustbin down (2) as shown in the picture below.
press the dustbin release button
2 Pull the washable micro filter out by holding the filter handles located inside the filter.
Pull out the filter
3 While pressing the button (1), turn the dustbin cover (2) and remove it from the dustbin (3).
Press the button and twist the dustbin to remove it
4 Remove the dust from the metal mesh grille filter by using the combination tool.


Note: Do NOT pull the rubber attached to the metal mesh grille filter.

Remove dust from the filter by using the combination tool
5 After emptying the dustbin, clean the dustbin and filter under running water and leave it to dry in the shade out of direct sunlight.


Tip: With the dustbin upright and a bag over the top, tip the dustbin so the contents fall into the bag to reduce dust clouds.

Remove dust from the filter by using the combination tool
6 Reassemble the dustbin cover by aligning the release button with the groove. The dustbin and filter must be completely dry before reassembling the vacuum.
Reassemble the dustbin in
7 Put the washable micro filter in the dustbin cover by fitting the groove on the filter first, as shown in the picture below.
Put the washable micro filter in
8 Assemble the dustbin to the vacuum until you hear a click by following the order shown in the picture below.
Assemble the dustbin to the vacuum

Washable Micro Filter:

1 Remove the micro washable filter.
Pull out the filter
2 Remove any dust and clean with water after removal. It is recommended to clean it about once a month. Be sure to dry your washable micro filter completely in the shade* for 24 hours or more before reassembling for use.

*When heat is applied, product malfunction can occur.

Ultra Fine Dust Filter:

1 Detach the ultra fine dust filter (1) by turning it clockwise, and remove any foreign matter (2). Then, twist the filter back on (3).

*When assembling, turn the filter until the line below the lock image is not visible.

For further assistance, please contact our Chat Support or technical experts on 1300 362 603. To find your Samsung product's User Manual, head to Manuals & Downloads.

Thank you for your feedback!