Setting Up and Maintaining the Slim Ice Maker of your Single Door Freezer

Note: 

• Do not exceed the max line. Excessive water causes the ice to jam and not dispense well. 
• Use only potable water. Other liquids, such as green tea or milk may not dispense well. 
• Gently close the water bin. Otherwise, the water may drop or leak. 
• If you encounter a water leak, open the water bin and check if the water bin’s passage to the ice template is frozen. If this is the case, pour lukewarm water into the water bin up to the max line. Let the passage melt. 
• It is recommended to clean the water bin’s passage to the ice template on a regular basis because the passage is likely to freeze.

Note:

• Do not pull up the lever until the ice has frozen completely. Half-frozen ice may jam and damage the ice bucket.
• Do not tilt without lifting the ice bucket. The ice bucket may break. 
• Do not pour water directly into the ice bucket for ice making. The ice bucket may break. 
• Do not leave the freezer door open. The ice in the ice bucket melts and jams. 
• In case of a power failure, make sure to empty the ice bucket before making ice. 
• Use only potable water. 
• The ice cubes may not dispense at once, depending on the ice state. In this case, try pulling the lever several times. 
• If the ice does not dispense because an excessive amount of water was filled, remove the ice template and empty. If this issue continues, uninstall the Slim Ice Maker unit and empty.

Note:

• When cleaning the component parts of the Slim Ice Maker such as the water bin, ice bucket, and ice tray, make sure they are completely dry after cleaning.
• When cleaning the Slim Ice Maker unit, make sure to completely dry the inner and outer parts of the unit after cleaning. Incomplete dryness may cause the ice maker lever to fail. In this case, dry the Slim Ice Maker completely for 2-3 days. Then, try again.