Check out the information codes on my oven
Frequently displayed information codes and solutions
Code |
Meaning |
Solutions |
---|---|---|
C-d0
|
Button problem |
Clean the buttons and make sure there is no water on/around them. Turn off the oven 30 seconds and try again. if it appears again, call Samsung customer care |
S-01 |
Safety shutoff Oven has continued operating at a set temperature for an extended time period.
|
This is not a system failure. Turn off the oven and remove the food. Then try again normally. |
dC dE |
Divider check needed If the divider is removed during cooking in Dual cook mode. If the divider is inserted during cooking in Single cook mode. |
The divider must not be removed during cooking in Dual cook mode. Turn off the oven and then restart. If the problem continues, turn off the power for 30 seconds or more and then reconnect. |
C-d1 |
Door lock malfunctions |
Turn off the oven and then restart. If the problem continues, turn off the power for 30 seconds or more and then reconnect. |
C-20
|
Temperature sensor is needed to be check |
Press the Stop/Cancel and operate again. If it occurs again, turn off the microwave again over 30 seconds and try again. If it appears again, call on Samsung customer care. |
C-21
|
Temperature sensor detect higher temperature than setting temperature |
Turn off the oven for cooling the product and then try setting again. If it appears again, contact Samsung customer care. |
C-22
|
Sensor malfunctions |
Turn off the oven and then restart. If the problem continues, turn off the power for 30 seconds or more and then reconnect. |
Note:
- If you find an information code that is not listed on this page, please find a manual with the specific model number.
- It may have a different design and information code depending on the model.
- If you are unable to clear any code from your oven, please contact the Samsung service center for further support.
Additional information codes
Code |
Meaning |
Solutions |
---|---|---|
C-F1 |
Only occurs during EEPROM Read/Write is not working |
Press the Stop/Cancel and operate again. If it occurs again, turn off the microwave again over 30 seconds and try again. If it appears again, call on Samsung customer care. |
C-F0 |
If there is no communication between the main PCB and sub PCB. |
Turn off the oven and then restart. If the problem continues, turn off the power for 30 seconds or more and then reconnect. |
C-F2 |
The touch key is malfunction |
Press Stop and try again. |
Pr E |
This code means the oven is preheating. |
Pr E will display until the temperature is reached at the setting temperature. When the temperature reaches at the desired temperature, Pr E will disappear. While preheating, please keep the door closed. |
Note:
- If you find an information code that is not listed on this page, please find a manual with the specific model number.
- It may have a different information code depending on the model.
- If you are unable to clear any code from your oven, please contact the Samsung service center for further support.
This code appears when you select the Grill function and set the temperature between 50°C and 250°C, or if you select Normal Cooking mode and set the temperature between Grill 1 and 3, you are asked to reset the temperature with a message and a beep.
Note:
- It may have a different design and information code depending on the model.
- If you are unable to clear any code from your oven, please contact the Samsung service center for further support.
Thank you for your feedback!
Please answer all questions.