How to Clean Samsung AirDresser?

Last Update date : Feb 04. 2021

To get the best out of your AirDresser with every cycle and also to ensure it lasts, it is recommended to perform regular maintenance of the product. It involves the cleaning of air filter, water tank supply, drain tank and also descaling the product.

 

Please follow the below steps for AirDresser maintenance.

The water tank is used to store water that comes into direct contact with fabrics and accessories, which is why it is important to ensure it stays clean.

1 Wipe the outside of the water tank clean with a wet towel so that it does not gather any foreign material.
Clean exterior of tank
2 Wipe the inside of the water tank clean with a soft brush.
Clean interior of tank

Note: Putting liquids other than water, such as detergent or fabric softener, into the water supply tank can cause the product to malfunction.

3 Once cleaning is finished, completely remove any moisture on the outside of the water tank and reattach it to the product.
Clean inlets and outlets

Note: Make sure to wipe clean the water supply inlet connected to the water supply tank and also the drain nozzle connected to the water drain tank using a soft brush in order to prevent them from clogging.

Cleaning the air filter of your AirDresser is an important part of maintaining your product.

1 Hold the bottom of the air cover and pull out.
Pull out air filter
2 Press on the two hooks on the upper part of the filter and pull to remove.
Remove air filter
3 Use a brush and running water to clean the filter.
Clean air filter
4 Completely dry the filter in a shaded area and reinsert the filter.
Reinsert air filter
5 Insert the top of the cover into the product and then push the cover.
Reinsert air cover

Please Note: Do not place the filter in direct sunlight when drying as this may make the filter material brittle and more prone to damage.

Descaling needs to be performed immediately after getting the notification message, otherwise some functions may be restricted for use and may decrease performance or even shorten the lifespan of the product.

1 When the Descaling Required message appears on the display, remove all items from the product and then tap and hold Sanitize and Dry for 3 seconds.
2 Empty the Refill Tank and the Drain Tank.
3 Dilute a descaling agent with water as recommended by the manufacturer.
4 Fill the Refill Tank with the diluted descaling agent up to the MAX line.
5 Tap and hold Start/Pause to start descaling.
6 When the Refill/Drain the tank message appears on the display, empty both the Refill Tank and the Drain Tank, and then rinse them thoroughly.
7 Fill the Refill Tank with clean water up to the MAX line, and then reinsert the Refill Tank and the Drain Tank.
8 When the Supply/Drainage Complete message appears on the display, tap and hold Start/Pause.
9 When the descaling is complete, empty the Drain Tank and fill the Refill Tank with water.

Note:

  • Vibrations and noise may occur during the descaling process, however, this is normal and there is no problem with the product.
  • You may see the Refill the tank message when you use the product the first time after descaling. This is also normal. Fill the Refill Tank with water and press Start/Pause to resume.
  • Bubbles may form if the descaling agent is not rinsed thoroughly. Make sure to rinse the Refill Tank and the Drain Tank thoroughly after descaling.

Thank you for your feedback!