Cleaning fingerprints on the stainless steel Microwave

* Please note, this section is designed to give you basic product troubleshooting information, also refer to your user manual for more information.

Important: After cleaning, always rinse all residual cleaner off the surface and dry it thoroughly. 

NOTE:

● Do not spray water or cleaner directly on the surface; instead apply a small amount of cleaner on the rag and then clean the surface.
 

● Always clean up spills and stains as quickly as possible using the simplest method to get the job done. Start by wiping with a damp cloth in the direction of the polish lines and follow up by drying the area to prevent water spots. If that does not work, try a weak solution of dish washing liquid, household ammonia, or a glass cleaner on a soft cleaning cloth. Again, rinse and dry thoroughly. Do not, however, mix any of those cleaning agents together. 

 
● Never use steel wool or bleach, or any product containing chlorine, which can damage the protective layer and the metal finish.

● Rinse and dry the surface thoroughly to remove all traces of the cleaning agent and prevent spotting from trace minerals in the water.

 
● Glass cleaner can leave streaks on the stainless steel finish.

 
● Harsher chemicals (benzene, thinner, bleach, alcohol, acetone, ammonia) can erode the protective coating that is applied to the surface and could cause an electric shock.