How to reverse the door of Samsung Refrigerator

Step 1. Unplug refrigerator from power supply and empty contents from refrigerator before starting the door reverse procedure.

Step 2. Remove left cover with small screwdriver.

Step 3. Remove the hinge cover using a small screw driver to unclip the cover, be careful not to damage the cover.

Step 4. Remove the wire cover and cap door.

Step 5. Disconnect the housing.

Step 6. Disconnect the wire connector.

Step 7. Remove 2 screws on the upper hinge.

Step 8. Remove the fridge door from the middle hinge.

Step 9. Disassemble the middle hinge to add using a 5mm Allen wrench (2 screws) and a philips driver (1 screw).

Step 10. Remove the freezer door from the bottom hinge.

Step 11. Switch position of the cap.

Step 12. Position the door in a safe working place, and taking care not to damage door.

Step 13. There are lever Auto closer and screws at the bottom of fridge and freezer doors that need to be relocated.

Step 14. Carefully lay a refrigerator on the back for bottom hinge and feet changing.

Step 15. Switch the position of screw cap.

Step 16. Assemble the middle hinge by using the 5mm Allen wrench and a philips driver.

Step 17. Assemble the middle hinge by the 5mm Allen wrench.

Step 18. Switch the position of bottom hinge and leg.

Step 19. Switch the door wire direction to opposite side.

Step 20. Lift refrigerator to a standing position.

Step 21. Assemble the cap space door.

Step 22. Change the position of the fridge and freezer door gasket.

Step 23. Detach the Fridge and Freezer gaskets and attach them after rotating 180°.

Step 24. Insert door wire cover.

Step 25. Insert the top hinge.

Step 26. Reconnect the wire connector.

Step 27. Insert the wire.

Step 28. Assemble the cap control.