What do the information codes on my washing machine mean?
[Solution]
The following information codes may be displayed on the washer:
Code |
Meaning |
Solution |
dc |
Unbalanced load prevented the washer from spinning |
Reposition the load, and press the Cycle Selector dial. |
dL |
The door was unlocked while the washer was running. |
Press the Power button to turn off the washer, and then restart the cycle. |
dS |
The door was opened while the washer was running. |
Close the door tightly and restart the cycle. |
FL |
The washer failed to lock the door. |
Close the door tightly and restart the cycle. |
Hr |
Washer temperature control problem. |
Check to make sure the hoses are connected properly, hot water to the hot water connection, and cold water to the cold water connection. Make sure your home's hot water heater is working. |
LE |
The washer has tried to fill but has not reached the proper water level. |
Check the water supply valves are fully opened. Make sure your water supply is a minimum of 20 psi. |
LO |
The door will not unlock. |
Make sure the door is firmly closed. Push the power button to turn off the washer, and then turn it on again. |
E3 |
The motor is not running properly. |
Restart the cycle pressing the Cycle Selector dial. |
nd |
The washer is not draining. |
Make sure the drain hose is not kinked. |
nF |
The washer tries to fill but is unsuccessful. |
Make sure the water faucets are open to the end. Check for kinked hoses. Check the inlet screens on the fill hoses. |
If the proposed solutions do not work, or, if your washing machine is displaying a code that is not listed here, please click the "Create Online Service Request" button below to begin the service process.
※ Note
If service is needed, please document the code your washer is displaying.
Important
If the error code is LE, you may be using the wrong type, or too much, detergent.
Use only HE detergent. Non-HE detergent will cause a false LE error code.
To find out if you are using too much detergent, fill the washer with no clothes inside.
If you see suds in the water, you are using the wrong type of detergent, or too much detergent.
Thank you for your feedback!
Please answer all questions.