[2023] How to register and control devices using SmartThings on your Samsung Smart TV

In 2023, SmartThings will provide a more seamless experience. Samsung smart devices will be automatically detected and registered in SmartThings without the need for manual scanning or a complex registration process. Once a device is detected and automatically registered, a pop-up message will appear on the TV, and the newly added device can be viewed in the SmartThings Device tab, either in Map view or Card view.

For more information about using the SmartThings app on your Samsung TV, please refer to our additional SmartThings guide. Some Samsung products will require a separate SmartThings Dongle accessory as well. To learn about connecting devices using this accessory, please see our SmartThings Dongle guide.

In addition to the automatic device connection method, you can register your device directly in SmartThings using the following instructions.

Once you’ve set up your SmartThings account on your phone or tablet, you can then view and control your registered devices straight from your TV. To register new devices to SmartThings and use them from your mobile device and TV, please follow the steps below:

1) Enable the SmartThings Hub feature on the TV.

2) Navigate to and open the SmartThings app on your phone or tablet, and then tap Add (the plus icon). Tap Add device.

3) Swipe to and tap By device type, then tap your device, and then tap the brand if needed.
Note: You can also tap By brand instead.

4) Tap Start, and then select a location and room if prompted. Tap Next.

5) Follow the on-screen instructions to add your device.

6) On your Smart TV, log in to the same Samsung account that you are logged in to on your phone or tablet. Then, you will see the device registered on the SmartThings app on your TV. Select the device to begin using it.

A Legacy device is an appliance that does not support SmartThings but can be controlled through the infrared sensor on your IR remote control. To control legacy devices using the SmartThings app on a TV, please refer to the following steps:

1) Point the IR remote control at the legacy device, and then press the Power button so that the TV detects the IR signal.

2) A pop-up notification will appear on the TV. Select Registration, and then confirm that you would like to control the device. Select Yes.

3) A second pop-up notification will be displayed. Select Go to navigate to the SmartThings app, where you will see the full SmartThings app screen.

Compatible devices and functions for legacy devices:

• Air conditioner: Power On/Off, Temperature Up/Down, Wind Up/Down
  
  
• Air purifier: Power On and Off, Wind Up/Down
  
  
• Electric fan: Power On and Off, Wind Up/Down
  
  
• Robot vacuum: Power On and Off, Start/Stop
  
  
• Humidifier: Power On and Off, Wind Up/Down

Supported brands for compatible devices are as follows:

• Air conditioners: Carrier, Century, Chigo, Conia, Coolfree, Daewoo, Daikin, Derby, Frigidaire, Goodman, Gree, Haier, Hauzen, Himade, Hitachi, Homsys, Hyundai, Lennox, LG, Mitsubishi, Panasonic, Rheem, Samsung, Sharp, Toshiba, Trane, Whirlpool, Whisen, Winia, Yonan, and York

• Air purifiers: Amway, BLUEAIR, Cairs, Carrier, COWAY, Daikin, Dyson, Electrolux, GE, Gree, Hitachi, Idylis, IQAir, Kenmore, LG, Panasonic, Rabbit Air, Sharp, Shinil, Toshiba, and Winix

• Robot vacuum: Ariete, Auto Vacuum, Bobsweep, Ecovacs, Hoover, iRobot, LG, Lifero, MIDEA, Monoprice, Philips, Samsung, Sharp, Vileda, Wap, and Yujin Robot

• Humidifiers: Bionaire, Crane, Daewoo, Dyson, Electrolux, Haan, Lasko, Levoit, OA, RedCore, and Winia

• Electric fans: Airmate, Around, Asahi, Aucma, Balmuda, Bionaire, Black & Decker, Bokuk, Borg, Cecotec, Cuchen, Daewoo, Diamond, Dimplex, Dyson, Ecolighters, Electroman, EMK, Europace, Fusibo, Goldstar, Haan, Haier, Hanabishi, Hanil, Hitachi, HJ, Holmes, Honeywell, Inoq, KDK, KUL, Kuyal, Lasko, LG, Lian, Magic Chef, Midea, Mitsubishi Electric, Moretti, Mylek, Optimus, Panasonic, Rowenta, Samsung, Sharp, Shinil, Smartech, Taurus, Toshiba, Vornado, and WindMere

Enjoy a comfortable lifestyle using the SmartThings app. You can connect your home devices and appliances to SmartThings easily and control them with a single touch. Once registered, the new appliance will also appear in your mobile SmartThings app.

1) Navigate to the SmartThings app on your TV, and then select Add device (the plus icon). Your available Samsung smart home devices will appear in the Add device list.

2) Select and register your desired Samsung smart home device using your remote control.

3) You can then control your smart home device from the SmartThings app on your TV.

You can use the mobile SmartThings app to register your TV, smart appliance, or various IoT devices. Some IoT devices can only be registered using the mobile app. Simply tap the Add icon (the plus sign) in the mobile app to begin adding and registering a device.